Warrior 1984-2006 Jeep YJ TJ Wrangler Cherokee Steering Stabilizer Shock Kit 800030
1 Offer
Warrior 1984-2006 Jeep YJ TJ Wrangler Cherokee Steering Stabilizer Shock Kit 800030
1 Offer.jpg)
Power Steering Gear Box compatible for Jeep Cherokee Grand Wagoneer J10 J20 4WD 276528
1 Offer
.jpg)
MaxTrac Suspension 2007-2018 Jeep Wrangler JK 2dr 4dr Front Adjustable 2WD 4WD Track Bar 999700
1 Offer
MaxTrac Suspension 2014-2026 Dodge Ram 2500 3500 4WD Front Adjustable Track Bar 992800
1 Offer
MaxTrac Suspension 2007-2018 Jeep Wrangler JK 2dr 4dr Front Adjustable 2WD 4WD Track Bar 999700
1 Offer
MaxTrac Suspension 2017-2025 Ford F-250 F-350 4WD Front Adjustable Track Bar 993300
1 Offer
SUPERLIFT 2014-2022 Dodge Ram 2500 2013-2022 Ram 3500 4WD High Clearance Dual Steering Stabilizer Kit With Superlift Cylinders 92712
1 Offer
KSP Heavy Duty Adjustable Tie Rod Kit for 2001-2010 Chevy Silverado & GMC Sierra 2500/3500
1 Offer
0-6" Adjustable Tie Rods Kits For 1999-2007 Silverado Sierra 1500 2500 4WD - KSP Performance
1 OfferSteering Parts: Fixing Wander, Play and Death Wobble
Written by the PickupChain team · Last reviewed October 17, 2026
A truck that wanders on the highway, has play in the steering wheel or shakes violently after a bump usually has worn steering joints. The most common culprits are tie rod ends, the drag link and, on solid-axle trucks like the Jeep Wrangler, Ram 2500/3500 or Ford Super Duty, the track bar bushings.
Bigger tires and lift kits put more load on every steering joint. Heavy-duty tie rods and adjustable track bars keep the geometry correct after a lift. A steering stabilizer dampens vibration, but it hides a problem rather than solving it if a joint is already loose.
Check the parts with a helper: one person rocks the steering wheel left and right with the engine running, the other watches each joint. Any joint that moves before the wheel turns needs attention.
Frequently Asked Questions
+What causes death wobble?
Death wobble is a violent front-end shake on solid-axle trucks, usually triggered by a bump at speed. Loose or worn track bar bushings are the most common cause, followed by worn tie rod ends, ball joints and incorrect caster after a lift. A steering stabilizer alone will not cure it.
+Do I need an alignment after replacing tie rods?
Yes. Tie rods set the toe angle. Even if you count the threads when swapping them, plan a professional alignment to avoid uneven tire wear.
+Should I upgrade steering parts after a lift?
On lifts above roughly 3 inches and with tires of 35 inches or more, heavy-duty tie rods and an adjustable track bar are strongly recommended. They restore geometry and handle the extra leverage of bigger tires.