Readylift 2021-2025 Ford Bronco Heavy Duty Track Bar Bracket With A 3" To 4" Lift 67-21361
1 Offer
Readylift 2018-2024 Jeep Wrangle JL 2018-2024 Gladiator JT Front Heavy Duty Adjustable Track Bar 77-6004
1 Offer
Readylift 2018-2024 Jeep Wrangle JL 2018-2024 Gladiator JT Front Heavy Duty Adjustable Track Bar 77-6004
1 Offer
.jpg)
Power Steering Gearbox Gear Box compatible for Chevy Blazer K10 K20 K30 compatible for Suburban 27-7524
1 Offer
Power Steering Rack and Pinion Assembly compatible for Honda Odyssey 3.5L 2011 2012-2017
1 Offer.jpg)
Power Steering Gear Box compatible for Chevrolet Bel Air 500 Two-Ten Series 1955 1956 1957
1 Offer.jpg)
4- 6 Lift Front Adjustable Track Bar compatible for Dodge Ram 03-12 with Track Rod Bracket
1 Offer.jpg)
.jpg)
Power Steering Gear Box compatible for Chevy C10 C20 compatible for GMC C1500 C2500 R3500 Jimmy Trucks
1 Offer
Steering Parts: Fixing Wander, Play and Death Wobble
Written by the PickupChain team · Last reviewed October 17, 2026
A truck that wanders on the highway, has play in the steering wheel or shakes violently after a bump usually has worn steering joints. The most common culprits are tie rod ends, the drag link and, on solid-axle trucks like the Jeep Wrangler, Ram 2500/3500 or Ford Super Duty, the track bar bushings.
Bigger tires and lift kits put more load on every steering joint. Heavy-duty tie rods and adjustable track bars keep the geometry correct after a lift. A steering stabilizer dampens vibration, but it hides a problem rather than solving it if a joint is already loose.
Check the parts with a helper: one person rocks the steering wheel left and right with the engine running, the other watches each joint. Any joint that moves before the wheel turns needs attention.
Frequently Asked Questions
+What causes death wobble?
Death wobble is a violent front-end shake on solid-axle trucks, usually triggered by a bump at speed. Loose or worn track bar bushings are the most common cause, followed by worn tie rod ends, ball joints and incorrect caster after a lift. A steering stabilizer alone will not cure it.
+Do I need an alignment after replacing tie rods?
Yes. Tie rods set the toe angle. Even if you count the threads when swapping them, plan a professional alignment to avoid uneven tire wear.
+Should I upgrade steering parts after a lift?
On lifts above roughly 3 inches and with tires of 35 inches or more, heavy-duty tie rods and an adjustable track bar are strongly recommended. They restore geometry and handle the extra leverage of bigger tires.