.jpg)
2pcs Front Lower Ball Joint compatible for Saab 9-2X 2005-06 compatible for Subaru Baja Crosstrek
1 Offer
42 Stainless Steel Throttle and Idle Cable Set compatible for Harley-Davidson FXST 1996-UP
1 Offer
2x Ball Joints Kit compatible for Cadillac Escaladev compatible for ESV EXT 2002-2006 K6541 12475478
1 Offer
Speedometer Drive Cable Assy compatible for Toyota T100 DLX SR5 6 Cyl 3.4L 1994-1998 New
1 Offer
New Power steering pressure Line Hose Assembly compatible for HONDA Odyssey 2008 2009 2010
1 Offer.jpg)
.jpg)
Power Steering Conversion Mount Bracket Kit compatible for Chevy C10 Pickup compatible for GMC Truck 60-66
1 Offer.jpg)
1 Set Power Steering Rack Line Conversion Fittings compatible for Ford Crown Victoria 03-11
1 Offer.jpg)
.jpg)
Lower Intermediate Steering Shaft Coupler compatible for Ford F150 Truck 05-08 New
1 Offer
.jpg)
Complete Front End KingPin Kit compatible for Golf Club Car Precedent 2004-up GasElectric
1 Offer
Steering Shaft Assembly compatible for Dodge Ram 1500 2014-2020 55057335AA 55057335AB
1 Offer
Dual Inner Tie Rod Removal Installation Tool Set compatible for Ford Compatible for Nissan Truck
1 Offer.jpg)
Intermediate Steering Column Shaft compatible for Toyota Camry 2012-17 Avalon 13-18 L4 2.5
1 Offer
Single Steering Stabilizer compatible for Ford F-250 F-350 Super Duty 4WD 1999-2004
1 OfferSteering Parts: Fixing Wander, Play and Death Wobble
Written by the PickupChain team · Last reviewed October 17, 2026
A truck that wanders on the highway, has play in the steering wheel or shakes violently after a bump usually has worn steering joints. The most common culprits are tie rod ends, the drag link and, on solid-axle trucks like the Jeep Wrangler, Ram 2500/3500 or Ford Super Duty, the track bar bushings.
Bigger tires and lift kits put more load on every steering joint. Heavy-duty tie rods and adjustable track bars keep the geometry correct after a lift. A steering stabilizer dampens vibration, but it hides a problem rather than solving it if a joint is already loose.
Check the parts with a helper: one person rocks the steering wheel left and right with the engine running, the other watches each joint. Any joint that moves before the wheel turns needs attention.
Frequently Asked Questions
+What causes death wobble?
Death wobble is a violent front-end shake on solid-axle trucks, usually triggered by a bump at speed. Loose or worn track bar bushings are the most common cause, followed by worn tie rod ends, ball joints and incorrect caster after a lift. A steering stabilizer alone will not cure it.
+Do I need an alignment after replacing tie rods?
Yes. Tie rods set the toe angle. Even if you count the threads when swapping them, plan a professional alignment to avoid uneven tire wear.
+Should I upgrade steering parts after a lift?
On lifts above roughly 3 inches and with tires of 35 inches or more, heavy-duty tie rods and an adjustable track bar are strongly recommended. They restore geometry and handle the extra leverage of bigger tires.