
maXpeedingrods Adjustable Rear Track Bar compatible for Jeep Wrangler TJ 1997 1998 1999-06
1 Offer
Heavy Duty Front Track Bar Compatible For Jeep Cherokee XJ 1984-2001 w/ 4-6.5 inch lift
1 Offer
0-6" Lift Front Adjustable Track Bar compatible for Panhard Rod compatible for Jeep Wrangler JK 07-18
1 Offer
SUPERLIFT 2000-2004 Ford F-250 F-350 Super Duty 2000-2005 Ford Excursion Pit Arm Fd W/ Pwr Strg 1112
1 Offer
Heavy Duty Adjustable Front Track Bar Compatible For Jeep Cherokee XJ 1984-01 w/4-6.5 lift
1 Offer
SUPERLIFT 2009-2013 Dodge Ram 2500 2009-2012 3500 Dropped Pitman Arm with 4-6" Lift 4009
1 Offer
SUPERLIFT 2003-2008 Dodge Ram 2500 3500 4-6" Lift with Original Steering Box Dropped Pitman Arm 4008
1 Offer
maXpeedingrods Dual Steering Stabilizer & Brackets compatible for Ram 1500 4WD 1994-1999
1 Offer
SUPERLIFT 2007-2017 Jeep Wrangler 2018 Jeep Wrangler Jk 2dr 4dr Strg Stab Kit Sl 92075
1 Offer
Pair Adjustable Rear compatible for Panhard Strut Track Rods compatible for Chevrolet Corvette 1963-1979
1 Offer
85999338 Power Steering Cylinder compatible for Ford 340A 445 450 540 540B 545 555C 575D
1 Offer
Warrior 1997-2006 Jeep TJ Wrangler Rubicon Unlimited Track Bar Bracket Rear Gray powder coat 800007
1 Offer
Warrior 1997-2006 Jeep TJ Wrangler Rubicon Unlimited Track Bar Bracket Rear Gray powder coat 800007
1 Offer
Warrior 1997-2006 Jeep TJ Wrangler Rubicon Unlimited Track Bar Bracket Rear Gray powder coat 800007
1 Offer
Front Upper Control Arms + Front Track Bar Drop Bracket compatible for Jeep Grand Cherokee
1 OfferSteering Parts: Fixing Wander, Play and Death Wobble
Written by the PickupChain team · Last reviewed October 17, 2026
A truck that wanders on the highway, has play in the steering wheel or shakes violently after a bump usually has worn steering joints. The most common culprits are tie rod ends, the drag link and, on solid-axle trucks like the Jeep Wrangler, Ram 2500/3500 or Ford Super Duty, the track bar bushings.
Bigger tires and lift kits put more load on every steering joint. Heavy-duty tie rods and adjustable track bars keep the geometry correct after a lift. A steering stabilizer dampens vibration, but it hides a problem rather than solving it if a joint is already loose.
Check the parts with a helper: one person rocks the steering wheel left and right with the engine running, the other watches each joint. Any joint that moves before the wheel turns needs attention.
Frequently Asked Questions
+What causes death wobble?
Death wobble is a violent front-end shake on solid-axle trucks, usually triggered by a bump at speed. Loose or worn track bar bushings are the most common cause, followed by worn tie rod ends, ball joints and incorrect caster after a lift. A steering stabilizer alone will not cure it.
+Do I need an alignment after replacing tie rods?
Yes. Tie rods set the toe angle. Even if you count the threads when swapping them, plan a professional alignment to avoid uneven tire wear.
+Should I upgrade steering parts after a lift?
On lifts above roughly 3 inches and with tires of 35 inches or more, heavy-duty tie rods and an adjustable track bar are strongly recommended. They restore geometry and handle the extra leverage of bigger tires.


.jpg)
.jpg)

.jpg)

.jpg)
