Zone OffRoad 2013-2018 Dodge Ram 3500 4WD DIESEL 4.5in Suspension Lift Kit System With Free Boot Protectors ZOND50N

Description Note: FREE SHOCK BOOT COVERS Featured Technology & Benefits Utilizes Heavy Duty Drop Brackets Correct Suspension Geometry Progressive Rate Coil Springs Notes: Although very rare, front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Optional t-case indexing ring kit recommended to reduce front driveline angle. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813. Vehicles equipped with a two piece drive shaft and a carrier bearing require bearing drop kit D5405. Not designed for dually models. Not designed for factory rear airbag suspension models. Quick Specs Front Lift Height: 4.5 Front Lift Method: Radius Arm Drop Brackets Rear Lift Height: 3 Rear Lift Method: Block Difficulty Level 1-5: 3 Wheel Size: 17x9+ Back Spacing: 4.5 Inch Max Tire Size: 35 X 12.50 Wheel Size: 17x9+ Back Spacing: 5.625 Inch Max Tire Size: 37 X 12.50 Zone Offroad 2013-17 Ram 3500 4.5in Radius Arm Drop Suspension System. This new lift system utilizes heavy duty drop brackets to relocate the new factory Ram radius arms. The new relocation brackets tie into the factory radius arm mounts as well as additional support to the frame. This relocation corrects the suspension geometry to compensate for the 4.5in of lift provided by the progressive rate coil springs. Extended bump stops, dropped pitman arm, track bar relocation and brake line relocation round out the front components. The rear is lifted via a 3in block and u-bolts. For those looking for a lower rear stance, choose the 2in rear block kit. Fitment Brand: Zone OffRoad 2013-2018 Dodge Ram 3500 DocumentVideo