Full Coilovers compatible for Subaru Forester 2009-2013 Coil Springs Suspension Struts

IntroductionMXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable and adjustable camber plates (applicable for some vehicles),which offer you a lowered stance, and improved performance for your daily use vehicle.ApplicationCompatible for Subaru Forester 2009-2013 3rd. GenerationSpecificationFront top mount: Pillow ball with camber plate Rear top mount: Standard rubber Damping adjustable: Not available Height adjustable: Yes, lowering 25-75mm depending on the vehicle models Camber adjustable: Available, front only Spring Rate Front: 10 kg/mm (560 lbs/in) Spring Rate Rear: 8 kg/mm(448 lbs/in) Front spring inner diameter: 70.5mm Rear spring inner diameter: 70.5mm Spring length Front: 230 mm Spring length Rear: 200 mm Shock type: Twin tube Spring Preload advised: 7-10 mm Color: Golden body with black springPackage includedPackage included： 2x Front coil-overs 2x Rear coil-overs 2x C spannersFeature1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stance 2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent 3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models) 4. CNC machined Aluminumtop mounts and lockers-- - excellent strength, and save weight 5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable 6. High tensile spring---600,000 times continuously test to assure its high tensile strength. 7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable. 8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions 9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel PartsNote1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations. 2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 3. Impact wrench is prohibited during the installation, it will loosen or damage the product. 4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles) 5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-5 months will keep it smooth and clean, which helps to extend the lifetime.