适配指南

Best Tire Sizes for the Toyota Tundra: Stock, Leveled & Lifted

更新于 2026年10月13日

Best Tire Sizes for the Toyota Tundra: Stock, Leveled & Lifted

Bigger tires are the most popular upgrade on the Toyota Tundra. How big you can go depends on your suspension. Here is what typically fits on 2022-2024 trucks at stock height, with a leveling kit and with a lift.

Tundra tire size by setup

These are typical specifications for the listed model years. Always confirm with your owner's manual, the tire placard in the door jamb and the retailer's fitment data before ordering.

SetupTypical tire sizeNotes
Stock heightabout 32 to 33 inch (e.g. 265/70R18, 265/60R20)Factory sizes vary by trim and wheel size
Stock, biggest without modsabout 33 inchMay touch at full steering lock with low-offset wheels
2 to 2.5 inch leveling kit33 to 34 inch (e.g. 275/70R18, 285/65R20)Most popular upgrade
Lift kit35 inch with a 3 inch lift plus some trimming, or a 6 inch liftUsually needs trimming or wheels with the right offset

How to read tire sizes

A metric size like 275/70R18 means 275 mm wide, a sidewall that is 70 percent of the width, on an 18 inch wheel. The overall diameter is about 33.2 inch. Flotation sizes like 35x12.50R20 give the height (35 inch) and width (12.5 inch) directly.

Going taller lowers your effective gearing and can make the speedometer read low. Plan to recalibrate the speedometer after a big size change.

What decides whether a tire rubs

  • Tire height and width: wider tires rub sooner at full steering lock.
  • Wheel offset: lower offset pushes the tire out toward the fender and bumper.
  • Suspension height: a level or lift creates room in the wheel well.
  • Trim parts: mud flaps, air dams and plastic liners are common rub points.

Shop tires for your Tundra

Compare all-terrain, mud-terrain and highway tires and prices from several retailers, filtered for the Toyota Tundra.

为您的皮卡选购零件

在每个页面选择您的车辆,即可查看与您皮卡匹配的零件。

适配 Toyota Tundra (2022-2024)

查看全部 →

本指南仅供一般参考。适配情况因车型年份、配置、驱动形式和现有改装而异。购买前请务必与零件制造商或零售商确认适配,并由合格的专业人员安装与安全相关的零件。