SUPERLIFT 2007-2013 Chevrolet Silverado GMC Sierra 1500 Lift Kit 6.5 Inch With Bilstein Rear Shocks K162B/86040X2

Description Notes: This Item Will Only Fit 2007-2013 Chevrolet Silverado GMC Sierra 1500 Not recommended for AWD models Does not fit models with Auto Ride or Auto leveling Only fits models with Cast Steel Control Arms Features: This is a complete knuckle style, strut spacer suspension lift kit for the Chevy/GMC 2WD or 4WD models inch “ with OE Cast Steel upper control arms Provides 6.5 inch � lift height Includes rear fabricated blocks that remove the factory block and rear Superlift shock absorbers or rear 5100 Series Bilstein shock absorbers True to the height Lift Kit at 6.5 Inches Allows for use of 20 inch � Factory Wheels Direct bolt-on (No Weld Design) Adds clearance for up to 35 inch � tires Front and Rear inch “ Superlift Shocks | Bilstein 5100 Series Shocks Benefits: Retains OEM caster and camber alignment specifications Maintains ride quality and handling characteristics Designed using Original Equipment (OE) CAD data for accuracy Corrects Front to rear Factory rake for a more level stance Include: All brackets, cross-members, belly pan, steering knuckles, strut spacers, axle spacers, rear block and u-bolt kit, and hardware required specific to the 2007-2013 4WD Chevrolet/GMC 1500. Superlifts true to the height 6.5 inch lift kit for the 2007-2013 Chevrolet Silverado or GMC Sierra 1500 is a great way to add height to your overall GM 1500 appearance. This allows you to select your ride. Superlift Suspension intentionally over-builds our suspension kits to be the best. Our uniquely engineered design adds strength and durability and has bonus features that others do not offer. Front lift is achieved by installing spacers on top of the factory coil-over shock assembly. Pre-load rings, installed below the coil springs, slightly increase spring rate to help offset the additional loads created by running larger tires, and firms up what would otherwise be a inch œ spongy inch � ride. The factory upper controls are retained and remain in their original location, while the factory lower control arms and axle housing are lowered, in relation to the frame. Superlift replacement steering knuckles, made of cast ductile iron, space the increased distance between the controls arms. Superlifts geometry, from steering timing and linkage angles to driveshaft and CV axle operating angles, yields optimal component service life and exceptional drivability. Our Lower Control arm cross-members are true to their height and are a one-piece, full-width, high-clearance design made of .25 inch � steel plate. The rear lift is achieved with a heavy-duty fabricated rear block. The primary axle u-bolts that are captured in the upper and lower plates with the secondary u-bolts attached to the OE leaf Spring to reduce pinion wrap. This kit includes front knuckles, front strut spacers, cross-members, a rear block and u-bolt kit and rear Shocks inch “ Superlift, Bilstein. All require parts are included to make sure your Silverado or Sierra handles and performance in all conditions. Fitment Brand:Superlift 2007-2013 Chevrolet Silverado 1500 2007-2013 GMC Sierra 1500 Document Video