For GT45 T4 VBand 1.05 A/R 600+HP Twin-Scroll Turbo charger Oil Return Feed Line Kit

For GT45 Turbocharger T4 V-BAND 600+HP +Oil Feed Return Line Kits 1. Aboutfor GT45 Turbocharger Fit for:for the vast majority of 4.0L - 6.0L engine Exhaust (Turbo Manifold) Flange:T4 Twin Scroll Flange Exhaust Outlet Flange:3.25 " Inlet Flange 4.25" Clamp V-Band Wastegate:w/o Wastegate Horse Power:Boost Horse Power up to 600+ BHP Turbo Height:243cm Turbo Width:273cm Oil Inlet:M9 2*M8*1.25 Oil Outlet:M19 2*M8*1.25 Compressor: Trim: 49.6 Inducer Diamter:69 mm Exducer Diamter: 98mm A/R: 0.66 Turbine: Trim:77.6 Inducer Diamter:88 mm Exducer Diamter:77.5 mm A/R:1.05 2.AboutOil Feed+Return Drain Line * Stainless Steel Braided * Includes complete install kit * It helps circulate oil from the turbocharger to the oil pan. * The kit provides a anodized look * gives a best cooling on your turbo and long lasting life. Oil Return Line: Length: 550mm || Inner Diameter: 21mm OilFeedLine: Length: 1000mm || Inner Diameter: 14mm Condition:100% Brand New Warranty:one year warranty NOTE: * Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage. * Make sure the oil drain line is lower than the turbo itself. * Ensure exhaust outlet are well sealed by welding * Professional installation is highly recommended. * This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order. * Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)! * This is universal application turbo, so modification might be required for some vehicles.