MaXpeedingrods Coilovers Suspension Kit compatible for Lexus IS250 IS350 RWD 06-13

IntroductionmaXpeedingrods-B2 coil-overs are designed as entry-level for street use. It features height adjustable and adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, and improved performance for your daily use vehicle.ApplicationCompatible For Lexus IS250/IS350 (GSE20/21) RWD 2006-2013Compatible For Lexus IS F RWD 2008-2014Compatible For Lexus GS300/GS350 RWD 2007-2011RWD Only, not fit for AWDSpecificationFront top mount: Standard rubberRear top mount: Standard rubberDamping adjustable: Not availableCamber adjustable: Not availableHeight adjustable: Yes, lowering 25-75mm depending on the vehicle modelsSpring Rate Front: 12 kg/mm (672 lbs/in)Spring Rate Rear: 9 kg/mm (504 lbs/in)Front spring inner diameter: 70.5 mmRear spring inner diameter: 70.5 mmSpring length Front: 190 mmSpring length Rear: 190 mmSpring Preload advised: 7-10 mmColor: Red body with black springPackage included2x Front coil-overs2x Rear coil-overs2x C spannersDimensionPackage size : 71.3*50.8*19.9 cmWeight: 24850 gFeature1. Lowered height adjustment from 25-75mm(depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stance2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)4. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight5. Heavy Duty Steel Lower Mounts--- Highly Durable Reliable6. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.8. Twin-Tube structure ---provides excellent handling control characteristics for most driving conditions9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel PartsNote1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.3. Impact wrench is prohibited during the installation, it will loosen or damage the product.4. Examine the clearance between tires and suspension. (The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3–4 months will keep it smooth and clean, which helps to extend the lifetime.