Readylift 2024-2025 Toyota Tacoma 3" SST3.3 Suspension System With Falcon 3.3 Struts Shocks 62-54360

Description Note: Not compatible with 2024 Tacoma models equipped with rear leaf springs. Fitment not confirmed on trucks with the optional sway bar disconnect. Not compatible with Adaptive Variable Suspension (AVS) vehicles. If installed on an AVS vehicle, a dash light will illuminate. Features: 3" front / 1" rear lift height to clear larger wheels and tires while retaining OEM ride comfort and control. All-new Falcon 3.3 Fast Adjust Dampers with dual external adjustment knobs: 3-position main compression knob (Soft, Custom, Firm). 8-position Micro Adjust dial for fine-tuning across terrain types. Performance-engineered monotube dampers with reservoir design, high-temp Red Line oil, and VOD (Volume Optimized Damping) for ultimate consistency and control. Hard-anodized 6061-T6 Aluminum bodies for superior impact resistance and thermal management. Tubular steel UCAs with proprietary high-angle ball joints designed for lifted applications. Tire Fitment: Up to 285/75R17 on 8” wide +35 offset (no trimming). Up to 295/55R20 on 8.5” +35 offset. 315/70R17 or 35x12.50R17 with minor trimming. The new full-use skid plate integrates seamlessly with factory components. Bolt-on installation – no cutting or permanent modifications required. Kit Components: 24+ Tacoma Rr Swaybar Bracket 24+ Taco, Fnt, Sway Bar Extn 24+ Taco Rr Sprg 24+ Taco Skd Plt 24+ Tacoma Diff Rear Spacer 24+ Tacoma Diff Front Spacer 24+ Tacoma 3/8" Laser Cut Washer 24+ Tacoma Rear Brake Line Bracket 24+ Tacoma Ddc 1/8" Laser Cut Washer 24+ Tacoma Frt Diff Drop, Ctr Sleeve 24+ Tacoma Frt Diff Drop, Ctr Bush 24+ Tacoma Frt Diff Drop, Center 24+ Tacoma Frt Diff Drop, Rh 24+ Tacoma Frt Diff Drop, Lh 24+ Tacoma Bump Stop Cup, Rear, Snap-in 24+ Tacoma, Bump Stop Pad, Left 24+ Tacoma, Bump Stop Pad, Right 24+ Tacoma, Bump Pad, Spacer 24+ Tacoma Frt Uca Assy, Lh 24+ Tacoma Frt Uca Assy, Rh 24+ Tacoma Frt Lt Co, Srs 3 Typ 3 24+ Tacoma Frt Rt Co, Srs 3 Typ 3 24+ Tacoma Rr Lt Dmper, Srs 3 Typ 3 24+ Tacoma Rr Rt Dmper, Srs 3 Typ 3 0.87" Od X 0.56 Id X 2.65"L Crush Sleeve 1.52" Od X 0.85"Id Polyurethane Bushing Falcon Bump Stop Hardened Steel Washer Hardware Pack Tire Fitment: Wheel Tire Note: Stock (17x7 +60) 285/70R17 No Trim (Widest tire you can put on, Knuckle clearance) 17x8 +35 285/70R17 No Trim 17x8 +35 285/75R17 No Trim 17x8.5 +47 285/70R17 No Trim 17x8.5 +47 285/75R17 No Trim 17x8.5 +25 285/70R17 No Trim 17x9 +1 285/70R17 May require trimming. (4mm clearance) Tire Size Comparison: 18x8 +35 285/65R18 No Trim 18x8 +35 285/70R18 No Trim 18x8.5 +47 285/65R18 No Trim 18x8.5 +47 285/70R18 No Trim 18x8.5 +25 285/65R18 No Trim 18x9 +1 285/65R18 May require trimming. (4mm clearance) 20x8.5 +35 295/55R20 No Trim 20x9 +18 295/55R20 No Trim 20x9 +1 295/55R20 May require trimming. (4mm clearance) Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application. Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience. ReadyLIFT proudly introduces the next evolution in Toyota Tacoma suspension performance: the all-new 3" SST3.3 Lift Kit (PN 62-54360) engineered specifically for the 2024 Tacoma equipped with factory rear coil springs. This innovative suspension solution redefines what’s possible from a bolt-on lift system—delivering superior ride quality, aggressive stance, and off-road capability surpassing our popular 3” Tacoma suspension system. Designed for drivers demanding more from their suspension, the SST3.3 kit combines a 3” front and 1” rear lift with our brand-new Falcon 3.3 Fast Adjust Monotube Shock System—a purpose-built upgrade offering unmatched comfort, control, and adaptability both on- and off-road. This system also includes heavy-duty DOM tubular steel upper control arms with corrected ball joint angles to maximize durability, alignment geometry, and articulation.