Grundig Tesla Gear Shift Stalk — Physical Column Shifter for Model 3 Highland 2025+ and Model Y Juniper - 2025+ Model 3 Highland (Not for 2024)

I. Product Overview Bring a physical gear stalk back to your 2025+ Model 3 Highland or 2025+ Model Y Juniper. The Grundig Gear Shift Stalk mounts on the right side of the steering column: push up for Reverse, push down for Drive, and press the end button for Park. Shift by touch like a traditional column shifter — no reaching for the center screen, no taking your eyes off traffic. Muscle-Memory Shifting. R, D, and P fall right under your hand with crisp tactile detents, making stop-and-go traffic, tight parking spots, and three-point turns noticeably easier. Non-Destructive, Reversible Setup. A plug-and-play harness connects to factory connectors — no cutting, no drilling, no damaged trim. Unplug it anytime and the column returns to stock. II. Key Features Physical Gear Shift Stalk. Push up for Reverse, push down for Drive, press the end-cap button for Park — direct tactile gear control without the touchscreen. Plug-and-Play Harness. Dedicated connectors snap straight into factory ports — no wire cutting, soldering, or splicing, and fully reversible for a worry-free install. Instant Response. Inputs register with no perceptible lag, so shifting feels as crisp and direct as a factory-installed stalk. OEM-Style Matte-Black Housing. A custom-molded housing that blends with the surrounding factory trim for a clean, built-in look. Screen Shifting Still Works. The stalk and the touchscreen operate independently — both stay active, so you can use whichever feels natural. III. Compatibility Designed specifically for the new Tesla models, the touchscreen shifter continues to function normally after installing the Grundig shifter—both remain active simultaneously, allowing you to choose your preferred shifting method. Supports both left-hand drive (LHD) and right-hand drive (RHD) models. Model 3 Highland (2025+ only) — does not fit the 2024 Model 3 Highland Model Y Juniper (2025+) IV. Specifications Brand Grundig Product Gear Shift Stalk (physical column shifter) Gear Control Push up — Reverse · Push down — Drive · End button — Park Compatible Models Model 3 Highland (2025+) · Model Y Juniper (2025+)Not compatible with the 2024 Model 3 Highland. Drive Side LHD & RHD Installation Approx. 1 hour · plug-and-play · no wire cutting Dimensions 25 × 25 × 7.5 cm Weight 0.7 kg V. Important Notes Confirm your vehicle model and year before ordering — this kit fits the 2025+ Model 3 Highland and Model Y Juniper only, and does not fit the 2024 Model 3 Highland. Professional installation is recommended. If installing yourself, power off the vehicle first and use a trim pry tool to avoid scratching factory trim. Make sure every harness connector clicks fully into place, and route cables away from the steering column and pedals before testing. Test the R, D, and P functions while the vehicle is stationary, and confirm everything works before driving. This stalk is a driving convenience aid and does not replace safe driving practices — always check your surroundings and follow traffic laws. Stop using the product and contact customer support if any shifting abnormality occurs; do not disassemble the stalk or harness yourself. After you place your order, we will provide a dedicated installation video to help you quickly complete the installation of your Tesla Gear Shift Stalk.