For GT35 GT3582 Turbo compatible for Ford Falcon BA/BF XR6 FPV F6 2.5 64mm Intercooler Pipe

ApplicationPerfect for all 4/6 cylinder and 3.0L-6.0L enginesNOTE:This turbo is an universal application turbo, some modification may be required based on individual vehicle. The dimension picture is available, please contact us if needed. Please check the details carefully before purchasing.2.5" 64mm Aluminum Universal Intercooler Turbo Piping Pipe Kit fits all Turbo Projects.SpecificationTurboHorse Power:Capable of Boosting Horse Power up to 600HPCooling Type:Water + OilExhaust Inlet (Turbo Manifold) Flange:T3 FlangeExhaust Outlet (Downpipe) Flange:4 BoltTurbine Trim:84Turbine Inducer Diameter:68mmTurbine Exducer Diameter:62.4mmTurbine A/R:0.63Compressor Trim:57Compressor Inducer Diameter:61.5mmCompressor Exducer Diameter:81.5mmCompressor A/R:0.7Bearing:Wet FloatWarranty:one yearInternal Wastegate:NoOil Inlet: M10*7/16-24Oil Outlet: M14.1 2*M8*1.25Water: M14*1.5Piping Pipe KitPipe Thickness: 1.8mmPipe length: 18''New Never been tried or installed.100% quality assurance testedMade out of high quality of 6061 aluminum Manual polishing finishedConditionNewPackage Including2x 90 Degree Aluminum Pipe 2.5"2x Straight aluminum pipe 2.5"2x 135 Degree Aluminum Pipe×2 2.5"2x U Aluminum Pipe×2 2.5"6x Straight Silicon Hose 2.5" (Blue )2x 90 Degree Silicone Hose×2 2.5"(Blue )16x Clamps 2.5"1x Turbo and gasketsNotice* Please check the specifications carefully before placing orders. If you are not sure about these information, please feel free to contact us.* This is universal application turbo, so modification might be required for some vehicles.* Professional installation is highly recommended (No Instruction Included).* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.* Make sure the oil drain line is lower than the turbo itself.* Gasoline car must install a water cooling device to avoid overheating.* Ensure exhaust outlet are well sealed by welding.