Rear Enhanced Suspension System compatible for FORD F-150 2WD 4WD 2015-2023

ApplicationCompatible for FORD F-150 2WD 4WD 2015 - 2020 compatible for FORD F-150 2WD 4WD King Ranch 2021 - 2026 compatible for FORD F-150 2WD 4WD Lariat 2021 - 2026 compatible for FORD F-150 2WD 4WD Limited 2021 - 2026 compatible for FORD F-150 2WD 4WD Platinum 2021 - 2026 compatible for FORD F-150 2WD 4WD Tremor 2021 - 2026 compatible for FORD F-150 2WD 4WD XL 2021 - 2026 compatible for FORD F-150 2WD 4WD XLT 2021 - 2026SpecificationCondition: Brand New Drilling Required: No Material: Rubber Spring Placement on Vehicle: Rear left and right Package Length, width and height: 33*21*21 cm Package Wight: 6.3 Kg Rubber spring--- Load capacity: Up to 6000 LBS Design height: 95 mm/37.4 inch Max. Extended: 95 mm/37.4 inch Compressed: 85 mm/33.45 inch Upper Bracket Height: 56.6 mm/22.28 inch Lower Bracket Height: 24 mm/9.45 inch Package includes（as the picture shows）: 2x Pre-Assembled Rubber springs 1x Installation instruction Includes hardware needed to InstallFeature1. Ease of installation: Directly replace the bump stop of the original car. 2. Ease of use: Requires zero maintenance. 3. Reliability: No air leaking, No need for air lines and compressors. 4. Stability: Reduce the sag of the rear end of the car and soften sharp rebounds. 5. Quality: High-quality rubber that has been verified many times.Note1. This product will not increase the load capacity of your vehicle. 2. Do not exceed the manufacturer's recommended weight limit. 3. All modifications must be installed by qualified personnel and in compliance with your local modification regulations. 4. It is necessary to ensure that there is at least 1/2" of gap between the kit and the frame when the car is empty. 5.Installation instruction included.